4. Adding the
Faults
- Click on the schematic window. The border will be highlighted blue.
From the Edit menu, select Edit>Select>All>Nets. All of the nets
should be selected as shown in Figure 9. You can see the total count of
the nets by selecting SELECT COUNTS from the setup palette icon.
It will show the number of nets selected at the bottom of the session window.
At the bottom of the window, you should see the line, 156 Faults added;
16 FDB already in database.
Figure 9
- Now add the the faults by choosing FAULT from the top of the
setup palette. Once you are in the fault palette select the ADD FAULTS
option from the palette. A dialog box will appear as shown in Figure 10.
Select both the stuck at 1 faults and stuck at 0 faults by selecting the
BOTH option and make sure that Selected Objects is selected.
Then click on OK.
Figure 10
- From the palette menu, click on UNSELECT ALL. All of the nets
should go back to their normal appearance.
click here to go
back to the Index